九州大学大学院 歯学研究院 生体材料学分野


九州大学大学院歯学研究院
口腔機能修復学講座生体材料学分野
Department of Biomaterials, Faculty of Dental Science, Kyushu University



HOME > Publications

2012年
Toshiyuki Suge, Kunio Ishikawa, Takashi Matsuo: Changes in the crystallinity of hydroxyapatite powder and structure of enamel treated with several concentrations of ammonium hexafluorosilicate. American Journal of Dentistry, 25(5): 299-302, 2012.
Nurazreena Ahmad, Kanji Tsuru, Melvin L. Munar, Michito Maruta, Shigeki Matsuya, Kunio Ishikawa: Effect of precursor’s solubility on the mechanical property of hydroxyapatite formed by dissolution-precipitation reaction of tricalcium phosphate. Dental Materials Journal, 31(4): 593-600, 2012.
Akihiro Otsu, Kanji Tsuru, Michito Maruta, Melvin L. Munar, Shigeki Matsuya, Kunio Ishikawa: Fabrication of microporous calcite block from calcium hydroxide compact under carbon dioxide atmosphere at high temperature. Dental Materials Journal, 31(4): 593-600, 2012.
Kazuhiro Sunouchi, Kanji Tsuru, Michito Maruta, Giichiro Kawachi, Shigeki Matsuya, Yoshihiro Terada, Kunio Ishikawa: Fabrication of solid and hollow carbonate apatite microspheres as bone substitutes using calcite microspheres as a precursor. Dental Materials Journal, 31(4): 549-557, 2012.
Xingling Shi, Masaharu Nakagawa, Giichiro Kawachi, Lingli Xu, Kunio Ishikawa: Surface modification of titanium by hydrothermal treatment in Mg-containing solution and early osteoblast responses. Journal of Materials Science: Materials in Medicine, 23:1281-1290, 2012.
Masakazu Kawashita, Koji Taninai, Zhixia Li, Kunio Ishikawa,Yasuhiro Yoshida: Preparation of low-crystalline apatite nanoparticles and their coating onto quartz substrates. Journal of Materials Science: Materials in Medicine, 23: 1355-1362, 2012.
Akiko Sakai, Alireza Valanezahad, Masao Ozaki, Kunio Ishikawa, Shigeki Matsuya: Preparation of Sr-containing carbonate apatite as a bone substitute and its properties. Dental Materials Journal, 31(2): 197-205, 2012.
Shingo Shibata, Toshiyuki Suge, Tomoko Kimura, Kunio Ishikawa, Takashi Matsuo: Antibacterial activity of ammonium hexafluorosilicate solution with antimicrobial agents for the prevention of dentin caries. American Journal of Dentistry, 25(1): 31-34, 2012.
Alireza Valanezahad, Kanji Tsuru, Michito Maruta, Giichiro Kawachi, Shigeki Matsuya, Kunio Ishikawa: A new biocompatible coating layer applied on titanium substrates using a modified zinc phosphatizing method. Surface and Coatings Technology, 206: 2207-2212, 2012.

2011年
Le Thi Bang, Kunio Ishikawa, Radzali Othman: Effect of silicon and heat-treatment temperature on the morphology and mechanical properties of silicon - substituted hydroxyapatite. Ceramics International, 37(8): 3637-3642, 2011.
Alireza Valanezahad, Kunio Ishikawa, Kanji Tsuru, Michito Maruta, Shigeki Matsuya: Hydrothermal calcium modification of 316L stainless steel and its apatite forming ability in simulated body fluid. Dental Materials Journal, 30(5), 749–753, 2011.
Takamitsu Mano, Kunio Ishikawa, Koji Harada, Hirotsugu Umeda, Yoshiya Ueyama: Comparison of apatite-coated titanium prepared by blast coating and flame spray methods -Evaluation using simulated body fluid and initial histological study- Dental Materials Journal, 30(4), 431-437, 2011.
Shingo Shibata, Toshiyuki Suge, Kunio Ishikawa, Takashi Matsuo: Occlusion of dentin tubules with antibacterial ammonium hexafluorosilicate solution for the prevention of dentin caries. American Journal of Dentistry, 24: 148-152, 2011.
Michito Maruta, Shigeki Matsuya, Seiji Nakamura, Kunio Ishikawa: Fabrication of low-crystalline carbonate apatite foam bone replacement based on phase transformation of calcite foam. Dental Materials Journal, 30(1), 14-20, 2011.

2010年
Pham Trung Kien, Michito Maruta, Kanji Tsuru, Shigeki Matsuya, Kunio Ishikawa: Effect of phosphate solution on setting reaction of α-TCP spheres. Journal of the Austrarian Ceramic Society, 46(2):63-67, 2010.
Alireza Valanezhad, Kanji Tsuru, Michito Maruta, Giichiro Kawachi, Shigeki Matsuya, Kunio Ishikawa: Zinc phosphate coating on 316L-type stainless steel using hydrothermal treatment. Surafce and Coating Technology, 205: 2538–2541, 2010.
Fumikazu Daitou, Michito Maruta, Giichiro Kawachi, Kanji Tsuru, Shigeki Matsuya, Yoshihiro Terada, Kunio Ishikawa: Fabrication of carbonate apatite block based on internal dissolution-precipitation reaction of dicalcium phosphate and calcium carbonate. Dental Materials Journal, 29(3): 303-308, 2010.
139.
Kanako Matsumoto, Kanji Tsuru, Giichiro Kawachi, Michito Maruta, Shigeki Matsuya, Ichiro Takahashi, Kunio Ishikawa: Reinforcement of carbonate apatite bone substitutes with carbonate apatite by Ca salt introduction. Journal of the Ceramic Society of Japan, 118(6): 521-524, 2010.
Abdullah AL-Mahmood Tarique, Kanji Tsuru, Michito Maruta, Akari Takeuchi, Shigeki Matsuya, Yoshihiro Terada, Kunio Ishikawa: In vitro osteoconductivity evaluation of alumina treated hydrothermally in CaCl2 solution. Journal of the Ceramic Society of Japan, 118(6): 512-515, 2010.
Kunio Ishikawa, Shigeki Matsuya, Xin Lin, Zhang Lei, Tetsuya Yuasa, Youji Miyamoto: Fabrication of low crystalline B-type carbonate apatite block from low crystalline calcite block. Journal of the Ceramic Society of Japan, 118(5): 341-344, 2010.
Lei Zhang, Yasunori Ayukawa, Racquel Z. LeGeros, Shigeki Matsuya, Kiyoshi Koyano, Kunio Ishikawa: Tissue-response to calcium-bonded titanium surface. Journal of Biomedical Materials Research: Part A, 95(1): 33-39, 2010.
Koh-ichi Udoh, Melvin L Munar, Michito Maruta, Shigeki Matsuya, Kunio Ishikawa: Effects of sintering temperature on physical and compositional properties of α-tricalcium phosphate foam. Dental Materials Journal, 29(2): 154-159, 2010.
Toshiyuki Suge, Akiko Kawasaki, Kunio Ishikawa, Takashi Matsuo, Shigeyuki Ebisu: Effects of ammonium hexafluorosilicate concentration on dentin tubule occlusion and composition of the precipitate, Dental Materials, 26(1): 29-34, 2010.

2009年
Satoshi Karashima, Akari Takeuchi, Shigeki Matsuya, Koh-ichi Udoh , Kiyoshi Koyano, Kunio Ishikawa: Fabrication of low-crystallinity hydroxyapatite foam based on the setting reaction of α-tricalcium phosphate foam. Journal of Biomedical Materials Research A. 88(3):628-633, 2009.
Akari Takeuchi, Melvin L. Munar, Hanae Wakae, Michito Maruta, Shigeki Matsuya, Kanji Tsuru, Kunio Ishikawa: Effect of temperature on crystallinity of carbonate apatite foam prepared from α-tricalcium phosphate by hydrothermal treatment. Bio-Medical Materials and Engineering, 19(2-3), 205–211, 2009.
Rungnapa Lowmunkong, Taiji Sohmura, Yumiko Suzuki, Shigeki Matsuya, Kunio Ishikawa: Fabrication of freeform bone-filling calcium phosphate ceramics by gypsum 3D printing method. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 90(2), 531-539, 2009.
Ryoji Shimogoryo, Toru Eguro, Eiichiro Kimura, Michito Maruta, Shigeki Matsuya, Kunio Ishikawa: Effects of added mannitol on the setting reaction and mechanical strength of apatite cement. Dental Materials Journal, 28(5): 627-633, 2009.

2008年
Yoshinari Matono, Masaharu Nakagawa, Kunio Ishikawa, Yoshihiko Terada: Effect of corrosion behavior of pure titanium alloy on fluoride addition in acidic environment by streptococcus mutans (Corrosion behavior of titanium by fluoride and streptococcus mutans). Prosthodontic Research & Practice, 7: 34-39, 2008.
Hanae Wakae, Akari Takeuchi, Koich Udoh, Shigeki Matsuya, Melvin Munar, Racuel Z LeGeros, Akihiko Nakasima, Kunio Ishikawa: Fabrication of macroporous carbonate apatite foam by hydrothermal conversion of α-tricalcium phosphate in carbonate solutions. Journal of Biomedical Materials Research A, 87(4): 957-963, 2008.
Chowdury Tanira Zaman, Akari Takeuchi, Shigeki Matsuya, Q. H. M. Shawket Zaman, Kunio Ishikawa: Fabrication of B-type carbonate apatite blocks by the phosphorization of free-molding gypsum-calcite composite. Dental Materials Journal, 27(5): 710-715, 2008.
Makoto Oda, Akari Takeuchi, Xin Lin, Shigeki Matsuya, Kunio Ishikawa: Effects of liquid phase on basic properties of α-tricalcium phosphate-based apatite cement. Dental Materials Journal, 27(5): 672-677, 2008.
Toshiyuki Suge, Akiko Kawasaki, Kunio Ishikawa, Takashi Matsuo, Shigeyuki Ebisu: Effects of calcium phosphate precipitation method on acid resistance to apatite powder and bovine tooth. Dental Materials Journal, 27(4), 508-514, 2008.
Q. H. M. Shawket Zaman, Akari Takeuchi, Chowdhury Tanira Zaman, Shigeki Matsuya, Kunio Ishikawa: Fabrication of Si-substituted hydroxyapatite foam using calcium silicates. Journal of the Ceramic Society of Japan, 116, 88-91, 2008.
Lester Joseph Cardenas, Akari Takeuchi, Shigeki Matsuya, Kunio Ishikawa: Effects of tricalcium silicate addition on basic properties of α-tricalcium phosphate cement. Journal of the Ceramic Society of Japan, 116, 83-87, 2008.
Kunio Ishikawa, Akari Takeuchi, Yumiko Suzuki, Kiyoshi Koyano: Effects of thermal treatment on injectability and basic properties of apatite cement containing spherical tetracalcium phosphate made with plasma melting method. Journal of the Ceramic Society of Japan, 116, 63-67, 2008.
Toshiyuki Suge, Akiko Kawasaki, Kunio Ishikawa, Takashi Matsuo, Shigeyuki Ebisu: Ammonium hexafluorosilicate elicits calcium phosphate precipitation and shows continuous dentin tubule occlusion, Dental Materials, 24, 192-198, 2008.
Xin Lin, Shigeki Matsuya, Masaharu Nakagawa, Yoshihiro Terada, Kunio Ishikawa: Effect of molding pressure on fabrication of low-crystalline calcite block. Journal of Materials Science: Materials in Medicine, 19(2), 479-484, 2008.

2007年
Y. Lee, Y. M. Hahm, Matsuya S, Nakagawa M, Ishikawa K: Characterization of macroporous carbonate-substituted hydroxyapatite bodies prepared in different phosphate solutions. Journal of Materials Science, 42, 7843-7849, 2007.
Y. Lee, Yeong M. Hahm, Matsuya S, Nakagawa M, Ishikawa K: Development of macropores in calcium carbonate body using novel carbonation method of calcium hydroxide/sodium chloride composite. Journal of Materials Science, 42, 5728-5735, 2007.
R. Lowmunkong, Sohmura T, Takahashi J, Suzuki Y, Matsuya S, Ishikawa K: Transformation of 3DP gypsum model to HA by treating in ammonium phosphate solution. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 80B, 386-393, 2007.
Shigeki Matsuya, Xin Lin, Koh-ichi Udoh, Masaharu Nakagawa, Ryoji Shimogoryo, Yoshihiro Terada, Kunio Ishikawa: Fabrication of porous low crystalline calcite block by carbonation of calcium hydroxide compact. Journal of Materials Science: Materials in Medicine, 18(7), 1361-1367, 2007.
Akinari Nakagawa, Shigeki Matsuya, Akari Takeuchi, Kunio Ishikawa. Comparison of the effect of added α- and β-tricalcium phosphate on the basic properties of apatite cement. Dental Materials Journal, 26(3), 342-347, 2007.
Junichi Yamazoe, Masaharu Nakagawa, Yoshinari Matono, Akari Takeuchi, Kunio Ishikawa: The development of Ti alloys for dental implant with high corrosion resistance and mechanical strength. Dental Materials Journal, 26(2), 260-267, 2007.
Masaaki Takechi, Youji Miyamoto, Kunio Ishikawa, Yukihiro Momota, Tetsuya Yuasa, Seiko Tatehara, Hideyuki Takano, Shiho Minamiguchi, Masaru Nagayama: Histological evaluation of apatite cement containing atelocollagen. Dental Materials Journal, 26(2), 194-200, 2007.

2006年
Shinya Tajima, Yuji Kishi, Makoto Oda, Michito Maruta, Shigeki Matsuya, Kunio Ishikawa: Fabrication of biporous low-crystalline apatite based on mannitol dissolution from apatite cement. Dental Materials Journal, 25(3), 616-620, 2006.
Eiichirou Sugimori, Satoru Shintani, Kunio Ishikawa, Hiroyuki Hamanaka: Effects of apatite foam combined with platelet-rich plasma on regeneration of bone defects. Dental Materials Journal, 25(3), 591-596, 2006.
Yoshinari Matono, Masaharu Nakagawa, Shigeki Matsuya, Kunio Ishikawa, Yoshihiro Terada: Corrosion behavior of pure titanium and titanium alloys in various concentration acidulated phosphate fluorides (APF) solutions. Dental Materials Journal, 25(1), 104-112, 2006.
Melvin L. Munar, Koh-ichi Udoh, Kunio Ishikawa, Shigeki Matsuya, Masaharu Nakagawa: Effects of sintering temperature over 1,300°C on the physical and structural properties of porous hydroxyapatite foam. Dental Materials Journal, 25(1), 51-58, 2006.
Toshiyuki Suge, Akiko Kawasaki, Kunio Ishikawa, Takashi Matsuo, Shigeki Ebisu: Effects of plaque control on the patency of dentinal tubules - An in vivo study in beagle dogs. Journal of Periodontology, 77(3): 454-459, 2006.
Yoshiya Ueyama, Takahiro Koyama, Kunio Ishikawa, Takamitsu Mano, Yukiko Ogawa, Hitoshi Nagatsuka, Kazuomi Suzuki: Comparison of ready-made and self-setting alginate membranes used as a barrier membrane for guided bone regeneration. Journal of Materials Science: Materials in Medicine, 17, 281-188, 2006.
Toshiyuki Suge, Akiko Kawasaki, Kunio Ishikawa, Takashi Matsuo, Shigeki Ebisu: Effect of ammonium hexafluorosilicate on dentinal tubule occlusion for the treatment of dentin hypersensitivity. American Journal of Dentistry, 19(4): 248-252, 2006.

2005年
Masaharu Nakagawa, Lei Zhang, Koh-ichi Udoh, Shigeki Matsuya, Kunio Ishikawa. Effect of hydrothermal treatment with CaCl2 solution on surface property and cell response of titanium implants. Journal of Materials Science: Materials in Medicine, 16, 985-991, 2005.
Toshiyuki Suge, Akiko Kawasaki, Kunio Ishikawa, Takashi Matsuo, Shigeki Ebisu: Comparison of the occluding ability of dentinal tubules with different morphology between calcium phosphate precipitation method and potassium oxalate treatment. Dental Materials Journal. 24(4): 522-529, 2005.
Yumiko Suzuki, Shigeki Matsuya, Koh-ichi Udoh, Masaharu Nakagawa, Yoshihiro Tsukiyama, Kiyoshi Koyano, Kunio Ishikawa: Fabrication of hydroxyapatite block from gypsum block based on (NH4)2HPO4 treatment. Dental Materials Journal, 24(4): 515-521, 2005.
Toshiyuki Suge, Akiko Kawasaki, Kunio Ishikawa Takashi Matsuo, Shigeki Ebisu: Effects of pre- or post-application of calcium chloride on occluding ability of potassium oxalate for the treatment of dentin hypersensitivity. American Journal of Dentistry, 18 (2): 121-125, 2005.
Tetsuya Yuasa, Youji Miyamoto, Masayuki Kon, Kunio Ishikawa, Masaaki Takechi, Yukihiro Momota, Seiko Takehara, Hideyuki Takano, Shiho Mimamiguchi, Masaru Nagayama: Proliferation and differentiation of cultured MC3T3-E1 osteoblasts on surface-layer modified hydroxyapatite ceramics with acid and heat treatments. Dental Materials Journal, 24(2), 207-212, 2005.
Akiko Kawasaki, Toshiyuki Suge, Kunio Ishikawa, Kazumi Ozaki, Takashi Matsuo, Shigeki Ebisu: Ammonium hexafluorosilicate increased acid resistance of bovine enamel and dentine. Journal of Materials Science: Materials in Medicine, 16(5), 461-466, 2005.
Masaharu Nakagawa, Yoshinari Matono, Shigeki Matsuya, Koh-ichi Udoh, Kunio Ishikawa: The effect of Pt and Pd alloying additions on the corrosion behavior of titanium in fluoride-containing environments. Biomaterials, 26(15), 2239-2246, 2005.

2004年
Shigeki Matsuya, Koh-ichi Udoh, Masaru Nakagawa, Kunio Ishikawa: Hydrolysis of calcite in potassium phosphate solutions. Phosphorous Research Bulletin, 17: 159-164, 2004.
Shigeki Matsuya, Koh-ichi Udoh, Masaru Nakagawa, Kunio Ishikawa: Effects of fluoride on the hydrolysis of calcite in potassium dihydrogen phosphate solution. Phosphorous Research Bulletin, 17: 153-158, 2004.
Yasuaki Shiga, Ryoji Shimogoryo, Tatsuo Oka, Shigeki Matsuya, Kunio Ishikawa: The Effects of initial hemostatic period on the mechanical strength and transformation of apatite cement. Dental Materials Journal, 23(3): 335-339, 2004.
Shinya Tajima, Norihiko Nishimoto, Yuji Kishi, Shigeki Matsuya, Kunio Ishikawa: Effects of added sodium alginate on mechanical strength of apatite cement: Dental Materials Journal, 23(3): 329-334, 2004.
Mariko Nakamura, Kunio Ishikawa, Yasuhiro Yoshida, Kazuomi Suzuki, Toshio Yamamoto: Development of self-setting calcium hydroxide preparation using dicalcium phosphate anhydrous and sodium hydrogen phosphate aqueous solution. Journal of the Ceramic Society of Japan, Supplement, 112(8), 434-439, 2004.
Kunio Ishikawa, Shigeki Matsuya, Xin Lin, Koh-ichi Udoh, Masaharu Nakagawa, Yoshihiko Terada, Hideo Yamada: Hardening of calcium hydroxide compact by carbonization. Journal of the Ceramic Society of Japan, Supplement, 112; S789-S791, 2004.
Masaaki Takechi, Youji Miyamoto, Yukihiro Momota, Tetsuya Yuasa, Seiko Tatehara, Masaru Nagayama, Kunio Ishikawa: Effects of various sterilization methods on the setting and mechanical properties of apatite cement. Journal of Biomedical Materials Research; Applied Biomaterials, 69B(1); 58-63, 2004.
Yukihiro Momota, Youji Miyamoto, Kunio Ishikawa, Masaaki Takechi, Tetsuya Yuasa, S. Tatehata, and Masaru Nagayama: Effects of neutral sodium hydrogen phosphate on the setting property and hemostatic ability of hydroxyapatite putty as a local hemostatic agent for bone. Journal of Biomedical Materials Research; Applied Biomaterials, 69B(1); 99-103, 2004.
Tetsuya Yuasa, Youji Miyamoto, Kunio Ishikawa, Masaaki Takechi, Yukihiro Momota, Seiko Tatehara, Masaru Nagayama: Effects of apatite cements on proliferation and differentiation of human osteoblasts in vitro. Biomaterials, 25(7-8), 1159–1166, 2004.
Kunio Ishikawa, Shigeki Matsuya, Masaharu Nakagawa, Koh-ichi Udoh and Kazuomi Suzuki: Basic properties of apatite cement containing spherical tetracalcium phosphate made with plasma melting method. Journal of Materials Science: Materials in Medicine, 15(1), 13-17, 2004.

2003年
Makoto Oda, Toshio Kaku, Atsushi Ookubo, Shigeki Matsuya, Kunio Ishikawa: The effects of hardening environment on the conversion to apatite and the mechanical strength of apatite cement. Journal of Japanese Society of Oral Implantology, 16(3), 400-408, 2003.
Ika Devi Ana, Shigeki Matsuya, Michio Ohta, Kunio Ishikawa: Effects of added bioactive glass on the setting and mechanical properties of resin-modified glass ionomer cement. Biomaterials, 24(18), 3061-3067, 2003.
Satoru Tanaka, Tamisuke Kishi, Ryoji Shimogoryo, Shigeki Matsuya, Kunio Ishikawa: Biopex® acquires anti-washout properties by adding sodium alginate into its liquid phase. Dental Materials Journal, 22(3), 301-312, 2003.
Yasuhiro Torii, Kousuke Itou, Yoshihiro Nishitani, Masahiro Yoshiyama, Kunio Ishikawa, Kazuomi Suzuki: Effect of self-setting primer containing N-acryloyl asparatic acid on enamel adhesion. Dental Materials, 19(4), 253-258, 2003.

12345